
SE/CE/FS Touchpanels
9-Pin D-Sub
The serial connector used for
programming or RS232 communications.
RMC Card
The Remote Monitoring and
Control (RMC) Card allows the
user to remotely monitor, control
and program their devices. It also
allows for data acquisition and
storage.
The RMC card plugs into the
extension connector of the EZ
Touchpanels and comes with an
Ethernet Port.
Note: On FS Panels,
Ethernet is available via a
protocol-specific adder card
for either PC or PLC
communications depending
on application needs.
15-Pin D-Sub
This serial connector is used for PLC
communications and can be used for RS232,
RS422 and RS485 communications.
USB Port (SE/CE)
USB port for programming
and for Data Logging /
Storage capabilities.
Ethernet (SE/CE)
Ethernet port used for
monitoring, programming, PC
and PLC communications, It
can also be used for internet
access and email alerts.
Option Cards (CE/FS)
Panels ending in -CE or -FS possess an
Option Card connector for additional
connectivity (Data Highway Plus, Modbus
Plus, Devicenet, Profibus, CC-Link.) Plug
option cards into the 62-pin connector.
In addition, CE Panels allow for compact
flash storage. Simply open back cover to
insert it in the top right corner.
Komentáře k této Příručce